SKU: PIRKPURPQK-ARM

Poured in Repair Kit - Purple

$65.00

Barcode:

Ships in 1-2 business days

Quick Size: Covers approximately 2.5 sqft at a depth of 1/2" (5 lbs of EPDM rubber granules & 1 lb of Aromatic binder)

Value Size: Covers approximately 5 sqft at a depth of 1/2" (10 lbs of EPDM rubber granules & 2 lbs of Aromatic binder)

Jumbo Size: Covers approximately 10 sqft at a depth of 1/2" (20 lbs of EPDM rubber granules & 4 lbs of Aromatic binder)

Giant Size: Covers approximately 20 sqft at a depth of 1/2" (40 lbs of rubber granules & 8.39 lbs of Aromatic binder)

Every kit comes with both rubber granules and the binder you picked measured at the right proportion you need to fill holes, cracks or gaps.

What binder do I pick? Aromatic binders are fine for 90% of the applications. They slightly amber the color of the EPDM granules. Pick Aliphatic binders if you care about the ambering effect or you are patching a pool surface or splash pad. This article goes into the difference between Aromatic and Aliphatic binders in more detail. If you are not sure, please call one of our techs at 203-659-0456

If you are looking into patching your playground PIP rubber surface, you could have prevented the damage from occurring in the first place with our DIY Poured In Place Rebinder™.

Click to learn more!

You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves

Make sure you pick a dry day to patch you rubber playground surface.
Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
Clean the area of all loose granules and debris.
Pour all of the rubber granules into the bucket and mix the entire content of the binder in a plastic pail that you plan to dispose of later.
Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder
Using a rounded trowel spread the mix onto the area you are patching.
Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
Secure the area and let cure for 24 to 48 hours.

Click Here for a Downloadable Instruction Sheet

Due to weather conditions and surface aging, color matching between patches and your original poured in place surface is unlikely. We recommended cutting and installing your patches to look like familiar shapes or designs to ensure aesthetically pleasing results.

Additionally, all patch kits ship with Aromatic Binder which tends to amber lighter shades of EPDM granules. We recommend using our Aliphatic Binder if you would like to reduce ambering.