Poured in Repair Kit With Primer - Beige

SKU: PIRKBGEQK-ARM

Poured in Repair Kit With Primer - Beige

$75.00

Barcode:

Ships in 1-2 business days

Quick Size: Covers approximately 2.5 sqft at a depth of 1/2" (5 lbs of EPDM rubber granules, 1 lb of Aromatic binder, & 1 pint of Primer)

Value Size: Covers approximately 5 sqft at a depth of 1/2" (10 lbs of EPDM rubber granules, 2 lbs of Aromatic binder, & 1 pint of Primer)

Jumbo Size: Covers approximately 10 sqft at a depth of 1/2" (20 lbs of EPDM rubber granules, 4 lbs of Aromatic binder, & 1 pint of Primer)

Giant Size: Covers approximately 20 sqft at a depth of 1/2" (40 lbs of rubber granules, 8.39 lbs of Aromatic binder, & 1 pint of Primer)

This playground rubber repair kit is an easy DIY solution that quickly solves a small problem before it turns into a big one.

The patch kit is a great remedy for rubber playground surfaces that are damaged, torn, have holes or have shrunk due to freezing and thawing.

Please note that all our repair kits come with aromatic binders. These class of binders do temporarily darken or yellow EPDM granules, especially the light colored granules. If you need to upgrade to aliphatic binders, which don't have any yellowing or darkening effect, please call 203-659-0456.

If you are looking into patching your playground PIP rubber surface, you could have prevented the damage from occurring in the first place with our DIY Poured In Place Rebinder™.

Click to learn more!

You will need: A utility knife, a bucket for mixing, a paint brush, a rounded trowel, soapy water and gloves

Make sure you pick a dry day to patch your rubber running track surface. We recommend over 40 degrees.
Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
Clean the area of all loose granules and debris.
Use the primer your received in your package to prime the edges and the base layer.
Right after you prime, pour all of the rubber granules into the bucket and mix the entire content of the binder in a bucket or lined cardboard box.
Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder. Use the entire amount of binder and the entire amout of rubber that we sent you.
Using a rounded trowel spread the mix onto the area you are patching.
Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
Secure the area and let cure for 24 to 48 hours.

Download instructions

Download SDS Seets

Easy to patch

Trassig’s patch kit is very easy to use and works great.

Very good

My boss has been so happy with me for finding tese repair kits. Ive saved him so much money by doing the repairs myself instead of him having to hire contractors. thank you!