No Products in the Cart
Quick Size: Covers approximately 2.5 sqft at a depth of 1" (6.25 lbs of SBR rubber buffings & 1 lb of Aromatic binder)
Value Size: Covers approximately 5 sqft at a depth of 1/2" (12.5 lbs of SBR rubber buffings & 2 lbs of Aromatic binder)
Jumbo Size: Covers approximately 10 sqft at a depth of 1/2" (25 lbs of SBR rubber buffings & 4 lbs of Aromatic binder)
Giant Size: Covers approximately 20 sqft at a depth of 1/2" (50 lbs of rubber buffings & 8.39 lbs of Aromatic binder)
Base Layer Patch Kit to repair the Impact attenuation layer of poured in place playground rubber surfaces.
Our poured in place rubber base layer patch kits are designed to repair damages that extend beyond the wear layer into the impact attenuation layer.
The depth of the base layer depends on the height of your playground equipment. The most common depth for the base layer is 2″.
After applying the base layer kit, you should apply a Wear Layer Patch Kit on top.
Caution: You should never patch base layer with wear layer material because the EPDM granules that make up the wear layer do not have the impact attenuation properties that the SBR rubber strands do.
If you are looking into patching your playground PIP rubber surface, you could have prevented the damage from occurring in the first place with our DIY Poured In Place Rebinder™.
Click to learn more!
You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves
Click Here for a downloadable instruction sheet