Poured in Repair Kit With Primer - Custom Mix

SKU: PIRKCUSTQK-ARM

Poured in Repair Kit With Primer - Custom Mix

$95.00

Barcode:

Ships in 1-2 business days

To enter your desired custom color combination, click "Add to Cart" (Not "Buy it Now"). Then click "View Cart". On the cart page scroll down to the "Note" field and enter your desired custom color combination. OR after placing your order you can send us an email at info@trassig.com or give us a call at 203-659-0456 to inform us of the colors you would like.

Quick Size: Covers approximately 2.5 sqft at a depth of 1/2" (5 lbs of EPDM rubber granules, 1 lb of Aromatic binder, & 1 pint of Primer)

Value Size: Covers approximately 5 sqft at a depth of 1/2" (10 lbs of EPDM rubber granules, 2 lbs of Aromatic binder, & 1 pint of Primer)

Jumbo Size: Covers approximately 10 sqft at a depth of 1/2" (20 lbs of EPDM rubber granules, 4 lbs of Aromatic binder, & 1 pint of Primer)

Giant Size: Covers approximately 20 sqft at a depth of 1/2" (40 lbs of rubber granules, 8.39 lbs of Aromatic binder, & 1 pint of Primer)

Every kit comes with both rubber granules and the binder you picked measured at the right proportion you need to fill holes, cracks or gaps.

What binder do I pick? Aromatic binders are fine for 90% of the applications. They slightly amber the color of the EPDM granules. Pick Aliphatic binders if you care about the ambering effect or you are patching a pool surface or splash pad. This article goes into the difference between Aromatic and Aliphatic binders in more detail. If you are not sure, please call one of our techs at 203-659-0456

If you are looking into patching your playground PIP rubber surface, you could have prevented the damage from occurring in the first place with our DIY Poured In Place Rebinder™.

Click to learn more!

You will need: A utility knife, a bucket for mixing, a paint brush, a rounded trowel, soapy water and gloves

Make sure you pick a dry day to patch your rubber running track surface. We recommend over 40 degrees.
Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
Clean the area of all loose granules and debris.
Use the primer your received in your package to prime the edges and the base layer.
Right after you prime, pour all of the rubber granules into the bucket and mix the entire content of the binder in a bucket or lined cardboard box.
Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder. Use the entire amount of binder and the entire amout of rubber that we sent you.
Using a rounded trowel spread the mix onto the area you are patching.
Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
Secure the area and let cure for 24 to 48 hours.

Download instructions

Download SDS Seets

Patch kit love!

We had multiple holes on our pool deck. Ordered the smallest patch kit, and it was more than enough. Very straightforward instructions. The prep of the spots was the toughest part.
Very happy we did it ourselves as opposed to paying $2000!

Perfect!

Our surface is very unique and this custom kit allowed us to get all the colors we needed. It doesn't exactly match the existing surface but that's to be expected given the age. Thanks!