Pool Deck Rubber Rebinder™ 2 Gallon Pail

SKU: TRSREB2LBP

Pool Deck Rubber Rebinder™ 2 Gallon Pail

$185.00

Barcode:

Rubber pool deck reconditioning and rebinding

Packaging: 2 gallon pail (17lbs)

Coverage: Each pail will cover on average 400 sf. This will be greatly affected by how tightly troweled the wear layer is and the last time the surface was rebinded.

Shipping time: One to two days.

Trassig's pool deck rubber Rebinder™ is the solution to the age old problem of granulation that usually leads to cracks, holes and expensive repairs to the rubber surface. It is designed to replenish your pool decks rubber surface with the bonding agents that were lost to UV exposure. It is a one component product that is ready to use without mixing with any other solvents. It is very easy to apply and will ensure your pool rubber surface will last.

The Different Stages of Poured In Place Deterioration

How to Recondition Your Poured In Place Surface with Trassig's Rebinder™

The cheapest way to save your pool's rubber surface at 48 cents per square foot vs. adding another wear layer at $10 to $30 per square foot
Will not crust or harden your surface if applied properly and at the right time.
Clear composition so it won’t darken your surface.
Looks white in the pail but cures clear.
Easy, DIY application. No need to add solvents
Environmentally friendly.

When do I apply the Rebinder™?

Apply Trassig's pool surface Rebinder when you see loose granules on your surface or in your pool. Ultimately, the frequency depends on how much UV rays the surface absorbs. If you are not sure, call one of our specialists at: 203-659-0456.

Download Rebinder Instructions

You will need the following materials:

leaf blower, (power washer)
tarp
paddle mixer
drip pan
paint roller

Look for a sunny day above 60 degrees. If it is going to rain within four hours after applying, do not rebind.

Step 1: Use a leaf blower to remove loose granulated rubber and other debris from area. If necessary, use a power washer with a wide angle nozzle and regular household detergent to clean the surface. Make sure your surface is COMPLETELY dry before continuing. Check under furniture for possible excess water and moisture.

Step 2: Lay down a tarp to avoid splashing and use a paddle mixer to thoroughly mix the Rebinder™ in the pail before use. It is necessary to mix the pool deck Rebinder™ before use.

Step 3: Pour the pool Rebinder™ into drip pan. Do not mix with other products or solvents. Notice that when you open the pail, and pour the liquid is white in color. Do not worry, this will change to a clear composition later.

Step 4: Use a cheap paint roller to equally distribute Rebinder™ on your poured in place surface because you will be throwing it away after installation. You will notice that as you apply the product it starts out as white. 20 minutes later it cures as a clear.

Step 5: Apply pressure when applying Rebinder™ in order to make sure the coat is even and sufficient. Go over each area only one time. Do not treat Rebinder™ like paint. Multiple coats are not necessary.

Step 6: Even though Trassig’s Rebinder™ is fast curing, secure area and allow 24 hours before use after application. If it rains 4 hours or more after application the Rebinder™ will not be affected, but it cannot rain during the application of the Rebinder™ for it to properly cure.

Watch our installation video here for an example and more information:

Click Here To Download Rebinder SDS

Happy

Got here in time , and worked out good . Protect our investment.

My pool EPDM surface never looked better

Wow. this product rally works. I am in Florida, and the sun really faded the colors of the EPDM pool surface we installed just 4 years ago. This rebinder brought back the original sheen they had.