SKU:

Running Track Repair Kit - Red

$65.00

Barcode:

Ships in 1-2 business days

Quick Size: Covers approximately 2.5 sqft at a depth of 1/2" (5 lbs of EPDM rubber granules & 1 lb of Aromatic binder)

Value Size: Covers approximately 5 sqft at a depth of 1/2" (10 lbs of EPDM rubber granules & 2 lbs of Aromatic binder)

Jumbo Size: Covers approximately 10 sqft at a depth of 1/2" (20 lbs of EPDM rubber granules & 4 lbs of Aromatic binder)

Giant Size: Covers approximately 20 sqft at a depth of 1/2" (40 lbs of rubber granules & 8.39 lbs of Aromatic binder)

This running track rubber repair kit is an easy DIY solution that quickly solves a small problem before it turns into a big one.

The patch kit is a great remedy for running track surfaces that are damaged, torn, have holes or have shrunk due to freezing and thawing.

If you are looking into patching your running track rubber surface, you could have prevented the damage from occurring in the first place with our DIY Poured In Place Rebinder™.

Click to learn more!

Customer Reviews

Based on 1 review Write a review

You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves

Make sure you pick a dry day to patch your rubber running track surface.
Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
Clean the area of all loose granules and debris.
Pour all of the rubber granules into the bucket and mix the entire content of the binder in a plastic pail that you plan to dispose of later.
Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder
Using a rounded trowel spread the mix onto the area you are patching.
Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
Secure the area and let cure for 24 to 48 hours.

Click Here for a Downloadable Instruction Sheet