A 3.81 kg metal can of Trassig Rebinder, featuring a red label with yellow and white branding, set against a plain white background.

Poured in place rubber surface Rebinder will make your safety surfacing look newer, replenish the colors, and help protect from UV exposure and other damage from the elements. It will keep a surface looking newer for longer.

Playground Poured in place rubber sealer and top coat

Comparison of pool area before and after rebinding.

rejuvinating poured in place rubber surfacing and playground rubberized flooring.

SKU: PIPREB5GAL-1

Poured in Place Rebinder™

$480.00

Barcode:

Packaging: 5 gallon pail (42lbs) or 1 gallon bucket (8.4lbs)

Coverage: Rebinder covers ~200sf of surface per gallon. This will be greatly affected by how tightly troweled the wear layer is and the last time the surface was rebinded.

Shipping time: One to two days. (Order before noon ET for same day shipping)

Trassig's Playground Poured in Place Rubber Rebinder™ is the solution to the age old problem of granulation that usually leads to cracks, holes and expensive repairs to the rubber surface. It is designed to replenish your playground safety surfacing with the bonding agents that were lost to UV exposure. It is a one component product that is ready to use without mixing with any other solvents. It is very easy to apply and will ensure your rubber surface will last.

The Different Stages of Poured In Place Deterioration

How to Recondition Your Poured In Place Surface with Trassig's Rebinder™

The cheapest way to save your Poured In Place surface at 48 cents per square foot vs. adding another wear layer at $12 to $25 per square foot.
Will not crust or harden your surface if applied properly and at the right time.
Clear composition so it won’t darken your surface.
Aliphatic based, so it is safe to apply to splash pads and pool decks.
Easy, DIY application. No need to add solvents.
Environmentally friendly. VOC Free.

When do I apply the Rebinder™?

You can only rebind your playground surface when it needs to be reconditioned. Rebinding prematurely can harden your playground surface if they are not ready for it. We tell our clients to do the "Shuffle test" which means rubbing your feet on the rubber surface to see if you can easily dislodge the granules. It's very important to ONLY Rebind when you see loose granules on your surface.

How does the rebinder compare to some of the water based conditioners out there?

There is no comparison. The Rebinder is a superior product by far. H2O or Water based surface conditioners might make it easier to clean machinery if they are sprayed, but they don't offer nearly the strengh and elasticity of the Rebinder. Many clients that use the water based sealers call us to order the Rebinder.

Will the Rebinder affect the impact attenuation of my safety surface?

No it will not, if used properly. We have tested the Rebinder extensively over the last 15 years and we have used it on thousands of surfaces. We have never experienced a difference in the HIC and GMAX values in our drops.

"Rebinder" and "to Rebind a PIP surface" are registered trademarks of the Trassig corporation.

Click Here To Download Rebinder Instructions

You will need the following tools:

leaf blower, (power washer if there is grime or moss on your surface.)
tarp or cardboard box
drip pan
paint rollers (We recommend these microfiber paint rollers)

Look for a sunny day above 60 degrees. If it is going to rain within four hours after applying, do not rebind.

Step 1: Use a leaf blower to remove loose granulated rubber and other debris from area. If necessary, use a power washer with a wide angle nozzle and binder friendly detergent to sanitize the surface. Make sure your surface is COMPLETELY dry before continuing. Check under equipment for possible excess water and moisture

Step 2: Lay down a tarp to avoid splashing.

Step 3: Pour Rebinder™ into drip pan. Do not mix with other products or solvents.

Step 4: Use a paint roller to equally distribute Rebinder™ on your poured in place surface

Step 5: Apply pressure when applying Rebinder™. Do not treat Rebinder™ like paint. You cannot apply more than a couple quotes on the same surface.

Step 6: Even though Trassig’s Rebinder™ is fast curing, secure area and allow 24 hours before use after application.

Watch our installation video here for an example and more information:

"Rebinder" and "to Rebind a PIP surface" are registered trademarks of the Trassig corporation.

Click Here To Download Rebinder SDS

Note: All aliphatic polyurethane binders contain aliphatic isocyanate which can be an allergen. During the normal PIP or roll-on process, none of the binder becomes airborne so the method of contact is usually on the skin. For that reason, we highly recommend using long latex gloves when applying the Rebinder.

"Rebinder" and "to Rebind a PIP surface" are registered trademarks of the Trassig corporation.