You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves
Make sure you pick a dry day to patch you rubber playground surface.
Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
Clean the area of all loose granules and debris.
Pour all of the rubber granules into the bucket and mix the entire content of the binder in a plastic pail that you plan to dispose of later.
Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder
Using a rounded trowel spread the mix onto the area you are patching.
Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
Due to weather conditions and surface aging, color matching between patches andyouroriginal poured in place surface is unlikely. We recommended cutting and installing your patches to look like familiar shapes or designs to ensure aesthetically pleasing results.
Additionally, all patch kits ship with Aromatic Binder which tends to amber lighter shades of EPDM granules. We recommend using ourAliphatic Binderif you would like to reduce ambering.
DESCRIPTION Our Rubber Surface Base Layer Binder is a polyurethane adhesive that is the best when working with buffings or base layer rubber for playground surfacing and track and field surfacing. Our 2...
Description 9 Replacement capsules for the Playground Sanitizer. Each capsule lasts for 3 hours of continuous spray. The system will effectively sanitize your playground equipment, poured in place rubber, shredded rubber,...